Blackwell Plastics partners with OEM manufacturers and sub-tier suppliers in South Texas including Houston, San Antonio, Austin and Corpus Christi to provide plastic injection molding and plastic extrusion of engineering grade resins that satisfy demanding industrial applications. Blackwell Plastics supports plastic injection molding and plastic extrusion projects from design to fulfillment.

Monday, January 23, 2012

Simple Challenges - Simple Solutions

The most frustrating problems are often the simplest solutions once you find them.

The life of a custom molder is full of adventure and daily challenges that can be frustrating at times, but also provide learning opportunities and great satisfaction when accomplished. Recently, we were running a general purpose natural ABS that was colored with color concentrate at the press. The material was dried and tumbled with the color and supplied to an autoloader at the machine. The process technician set up the machine and supplied first article samples to our quality department which were accepted for production. Soon thereafter the operator notices streaking in the color and notified QC.
Problem: Streaks and inconsistent color in the parts.

Initial Trouble shooting: The process technician noted concentrate in the site glass and in the feed section of the screw. The barrel was purged and restarted. It was noted that there was no evidence in the parts or purge that the material was wet. Following the purge and restart production parts were approved and resumed. Within the hour the problem resurfaced.

Second Trouble shooting: The process technician considered an incompatible melt index in the material and color concentrate that caused materials not to mix properly. Data sheets were reviewed and a melt index test was done to confirm that material and color were to specification. The machine was restarted and started running good parts. Within the hour the problem resurfaced again.

Third Trouble shooting: Scratching our heads we shut the machine down to tackle the next day. Upon coming in the morning the process technician was inspecting the equipment in preparation for another run and when he lowered the vacuum hose color concentrate spilled on the floor. The first clue to our problem.

Solution: It was determined that the specific gravity of the color concentrate was slightly greater than that of the ABS. As a result as the material travelled through the vacuum hose the heavier concentrate settled in the corrugations of the hose and starved the machine of color. Color concentrate was visibly present in the material presented to the throat of the press, but at the ratio blended prior to the vacuum loader. Upon recognizing the issue the vacuum pressure was increased to move the material with more force through the corrugated tube and the problem was resolved.

Sometimes the most frustrating and challenging problems are solved with the simplest of solutions. We hope you may park this experience in your memory bank and look like the smart guy when this happens in your shop. At Blackwell Plastics we believe it is important to do what you love and love what you do. If we can be of assistance, feel free to Ask an Engineer at or call us at 713 643-6577.

Jeff Applegate


  1. hello Its a Nice and informative blog. The quality of the content is too high and the information about frustrating problems is really helps everybody to helps.

    High Speed Injection Machine

  2. Your information is really very useful and easy to understand too... Also your way of expressing things is wonderful... Thanks for sharing such a great piece of info...

    Troubleshooting Challenges

  3. Wow very well informative and one of the best news for all. This kind of awareness news are keep us updated and Thanks for giving such a nice news. hot runner injection mould

  4. American Precision Products, Custom injection molders and mold makers injection mold thermoplastics, thermoplastic elastomers and thermoset materials.

  5. Hey thanks for sharing the same..its quite interesting to know about the same..
    Even you can check plastic injection molding information here too..its quite interesting..

  6. Thanks you very much for your informative news. Your latest techniques for making Custom Plastic Injection Molding are mostly useful for other Plastic Injection Moulding Manufacturers all over the world. I hope you will be continuing your writing about various plastic manufacturing products.

  7. Thanks for sharing very informative article. Plastic injection moulding is the simple as well as very complex process. First major problem in this process is "how to prepare the mould?"

  8. The blog was absolutely fantastic! Lot of helpful information . Keep updating the blog, looking forward for more contents...Great job, keep it up..
    custom plastic injection molding

  9. Nice Post.
    It is helpful and interesting post.
    Thanks for sharing!
    Injection molding companies

  10. keep sharing more informative post like that,.
    Desktop Casting

  11. This is great information. I learned a lot here.
    plastic injection molding